.22 (.224) Bullets

.22 (.224) bullets for reloading rifle cartridges

Bullets with a diameter of .224 inch are used in a wide range of rifle cartridges. The best-known application is .223 Remington, but the same bullet diameter is also used for cartridges such as .222 Remington, .222 Remington Magnum, .22-250 Remington, 5.56 NATO, .220 Swift, .224 Valkyrie and .22 Nosler.

In this category you will find .22 bullets in different weights and designs. The right choice depends on the cartridge, barrel twist rate, available magazine and chamber length, and the shooting discipline for which the ammunition is being loaded.

Which cartridges use .224 bullets?

The designation .22 (.224) refers to the diameter of the bullet and not to one specific cartridge. Bullets from this category can therefore be used in several cartridges, provided that suitable and reliable load data is followed.

• .223 Remington – one of the most widely used cartridges for target shooting, hunting and various rifle platforms.
• 5.56 NATO – uses the same nominal bullet diameter as .223 Remington, but has different chamber and pressure specifications.
• .222 Remington – a classic cartridge with a long history in target shooting and hunting.
• .222 Remington Magnum – the longer cartridge within the .222 family.
• .22-250 Remington – combines a .224 bullet with a relatively large case capacity and high velocities.
• .220 Swift – a well-known high-velocity .22 calibre cartridge.
• .22 Hornet – many modern rifles use .224 bullets, although older barrels may require a different bullet diameter.
• .223 WSSM – a short, wide cartridge that also uses .224 bullets.
• .224 Valkyrie – developed around longer and heavier .224 match bullets.
• .22 Nosler – a modern cartridge that uses the same bullet diameter.

Always check the exact calibre, barrel specifications and current load data. A shared bullet diameter does not mean that every bullet is automatically suitable for every cartridge or rifle.

What will you find in this category?

SEM Jacht & Schietsport offers .224 bullets from manufacturers such as Hornady, Lapua, LOS, Prvi Partizan and Sellier & Bellot. The available products differ in weight, profile, jacket construction and intended use.

• Light bullets from approximately 35 to 55 grain for cartridges such as .222 Remington, .223 Remington, .22 Hornet and .22-250 Remington.
• Medium-weight bullets from approximately 55 to 69 grain for general use and various shooting disciplines.
• Heavy match bullets of 69, 75 or 90 grain for barrels with a suitable, generally faster twist rate.
• FMJ bullets for training ammunition and disciplines where a fully jacketed bullet is preferred.
• HP and BTHP Match bullets for shooters who value consistent construction and an aerodynamic profile.
• Polymer-tip and specialised designs such as Hornady V-MAX, NTX, ECX and A-Tip Match.

Bullet weight and barrel twist

Bullet weight is normally expressed in grain. Within the .224 calibre range, available weights vary from light bullets of around 35 grain to long, heavy match bullets of 75, 80 or even 90 grain.

Weight alone does not determine which bullet will stabilise correctly. Bullet length, profile and material construction also affect the required barrel twist rate. Longer and heavier bullets generally require a faster twist than shorter and lighter designs.

Always check whether the selected bullet is suitable for the twist rate of your barrel before developing a load.

Popular product series

Hornady offers a broad selection of .224 bullets, including V-MAX, HP Match, BTHP Match, A-Tip Match, NTX and ECX. This provides options for common .223 Remington loads as well as more specialised applications.

Lapua is represented by product lines such as Scenar. These bullets are aimed at shooters who pay close attention to consistent dimensions, shape and production quality.

LOS produces FMJ BT bullets that are commonly selected for training ammunition.

Prvi Partizan and Sellier & Bellot offer several common bullet weights for cartridges such as .222 Remington and .223 Remington, including 55, 62 and 69 grain options.

What should you consider?

• Check that the bullet diameter is exactly .224 inch.
• Select a bullet weight and length that match the twist rate of your barrel.
• Use only reliable and current load data.
• Do not treat .223 Remington and 5.56 NATO as fully interchangeable without checking the rifle and chamber specifications.
• Check the maximum cartridge overall length and the available magazine space.
• Never use load data for a different bullet without verifying that it is suitable, even when the weight is the same.
• Match the bullet construction to the intended shooting application and any range or competition rules.

Related categories

In addition to bullets, SEM Jacht & Schietsport also offers cartridge cases, smokeless powder, primers, die sets, shell holders, reloading presses, case preparation tools, scales and measuring equipment for assembling complete cartridges.

Legal information

Bullets are reloading components that may be subject to legal requirements in the Netherlands. Sales take place in accordance with the applicable provisions of the Dutch Weapons and Ammunition Act and any other relevant regulations.

If you are unsure whether you are permitted to purchase a specific product, or if you have questions about the applicable conditions, please contact SEM Jacht & Schietsport. We will gladly explain the requirements that apply to your situation.

Why SEM Jacht & Schietsport?

SEM Jacht & Schietsport offers a broad range of .224 bullets from established manufacturers. With different weights, profiles and product series available, you can compare suitable options for cartridges such as .223 Remington, 5.56 NATO, .222 Remington, .22-250 Remington and other cartridges that use a .224-inch bullet.

Do you have questions about the correct bullet, suitable weight or compatibility with your cartridge and barrel twist? Our team is available to provide practical advice online and in our shop in Bornerbroek.