Recoil Pads for Hunting Rifles, Sporting Rifles & Air Rifles

Recoil Pads for Hunting Rifles, Sporting Rifles & Air Rifles

A quality recoil pad improves the connection between your rifle and shoulder while increasing overall shooting comfort. At SEM Jacht & Schietsport you will find recoil pads for hunting rifles, sporting rifles and air rifles in a variety of materials, shapes and thicknesses.

Our range includes rubber recoil pads, ventilated recoil pads, slip-on recoil pads and stock extenders. Whether you want to improve comfort, increase the length of pull or replace a worn recoil pad, you'll find a suitable solution for your rifle.

Why Replace Your Recoil Pad?

The recoil pad is the primary contact point between the rifle and your shoulder. If it is too hard, too slippery or too thin, shooting comfort and rifle control may be reduced. Replacing the recoil pad can improve both comfort and the overall fit of your rifle.

• Improves shooting comfort
• Provides better grip on the shoulder
• Can increase the rifle's length of pull
• Improves rifle fit and ergonomics
• Suitable for hunting rifles, sporting rifles and air rifles

Rubber Recoil Pads

Rubber recoil pads are among the most popular options because they combine durability, grip and cushioning. The rubber surface helps keep the rifle firmly positioned on the shoulder while reducing perceived recoil.

Different rubber compounds are available. Softer recoil pads generally offer greater cushioning, while firmer models provide increased stability and are less likely to catch on clothing.

Ventilated Recoil Pads

Ventilated recoil pads feature internal air gaps that allow the rubber to compress more easily during recoil. This design offers additional cushioning while keeping overall weight relatively low.

They are widely used on hunting and sporting rifles and are available in various thicknesses to suit different applications.

Slip-On Recoil Pads

Slip-on recoil pads fit directly over the existing butt of the rifle without requiring permanent modifications. They are quick to install and are ideal for shooters looking for additional comfort or a simple increase in length of pull.

Always choose the correct size to ensure a secure fit that will not shift during use.

Stock Extenders

A stock extender increases the distance between the trigger and the rear of the stock, commonly referred to as the length of pull. A rifle with a stock that is too short can feel uncomfortable and make it more difficult to achieve a consistent shooting position.

Adding a thicker recoil pad or dedicated stock extender allows the rifle to be better matched to the shooter's build and preferred shooting position.

Choosing the Correct Length of Pull

The ideal length of pull depends on body size, arm length, clothing and shooting style. A stock that is too long or too short can negatively affect rifle handling and shooting comfort.

The correct recoil pad can help fine-tune the rifle to achieve a more natural and repeatable shooting position.

Recoil Reduction & Shooting Comfort

A recoil pad reduces perceived recoil but cannot eliminate recoil completely. The level of cushioning depends on the material, thickness, shape and contact area against the shoulder.

A wider, softer recoil pad spreads recoil forces over a larger area, making extended shooting sessions more comfortable, particularly with larger calibres.

Recoil Pads for Hunting Rifles

Hunters often carry and shoulder their rifle repeatedly throughout the day. A recoil pad with excellent grip helps keep the rifle securely positioned while allowing a smooth and consistent mount.

Choose a model that balances comfort with a surface that does not excessively catch on outdoor clothing.

Recoil Pads for Sporting Rifles

Sport shooters benefit from a recoil pad that promotes a consistent shoulder position throughout training and competition. Depending on the discipline, recoil pad thickness and design may also influence rifle fit.

Always ensure your chosen recoil pad complies with the regulations of your shooting discipline.

Recoil Pads for Air Rifles

Air rifles can also benefit from an upgraded recoil pad, particularly more powerful spring-powered models or rifles with a stock that feels too short. A slip-on recoil pad is often a simple upgrade requiring no permanent modification.

Screw-On & Custom-Fitted Recoil Pads

Many recoil pads are attached using screws and must match the dimensions of the rifle stock. In many cases, the outer profile of the recoil pad can be ground to match the stock perfectly.

A professionally fitted recoil pad provides a seamless finish while maintaining the appearance of the rifle.

What Should You Consider Before Buying?

• Measure the height and width of your rifle stock.
• Determine the required thickness and length of pull.
• Choose between a slip-on or screw-on recoil pad.
• Select the preferred rubber hardness and grip level.
• Check the screw spacing where applicable.
• Consider whether fitting or grinding will be required.
• Verify compliance with your shooting discipline if applicable.

Installing a Recoil Pad

Slip-on recoil pads can usually be installed without tools. Screw-on models require careful alignment to ensure proper fit and secure attachment.

If necessary, oversized recoil pads can be ground to match the contours of the stock. This should be carried out carefully to avoid damaging the stock finish.

Maintaining a Recoil Pad

Rubber recoil pads should be cleaned with a damp cloth and mild cleaning products. Avoid aggressive solvents that may dry out or damage the rubber.

Inspect the recoil pad regularly for cracks, loose screws or excessive wear. Replacing a worn recoil pad helps maintain comfort and secure shoulder contact.

Frequently Asked Questions

What is the difference between a recoil pad and a stock extender?

A recoil pad provides shoulder contact and recoil cushioning, while a stock extender is specifically designed to increase the rifle's length of pull. Some thicker recoil pads perform both functions.

Will a recoil pad eliminate recoil?

No. A recoil pad reduces perceived recoil and distributes recoil forces more comfortably, but it cannot eliminate recoil completely.

Will every slip-on recoil pad fit my rifle?

No. The dimensions of your rifle stock must fall within the size range specified by the manufacturer.

Do screw-on recoil pads require fitting?

In many cases they do. Oversized recoil pads are often ground to match the exact outline of the rifle stock.

How do I choose the correct thickness?

Measure your current length of pull and determine how much additional length is required for a comfortable shooting position.

Can SEM Jacht & Schietsport help me choose the correct recoil pad?

Yes. If you provide the dimensions of your rifle stock together with the rifle manufacturer and model, we will gladly help you select the most suitable recoil pad.

Why Choose SEM Jacht & Schietsport?

SEM Jacht & Schietsport offers a carefully selected range of recoil pads and stock extenders for hunting rifles, sporting rifles and air rifles. Our experienced team is happy to help you choose the correct size, thickness and mounting style to improve comfort and achieve the perfect fit for your rifle.